RUD stainless steel chains
RUD offers the right chain for a wide range of applications. For applications with high demands on rust and acid resistance, RUD stainless steel chains offer a high degree of
flexibility for manual and motor-driven hoists. All rust and acid-resistant chains are designed and produced according to DIN 5684 part 1 and part 2.
Special features of the RUD stainless steel chains:
- resistant to rust and acid
- from 4 mm to 16 mm chain diameter
- similar to DIN 5684 part 1
- grade P: RPA and grade S: RSA
- without heat treatment
Technical data of the RUD stainless steel chain.
| DIMENSION [mm] | GRADE | LOAD CAPACITY FTR [KG] PER Mechanism GROUP | Proof force | Breaking force | WEIGHT | MATERIAL NUMBER | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Hand (1Dm) | M3 (1Bm) | M4 (1Am) | M5 (2m) | M6 (3m) | FFPmin [kN] | FBmin [kN] | [Kg/M] | |||
| nominal stress: ≤ 07 mm = 160 N/mm² ≤ 08 mm = 125 N/mm² | nominal stress: ≤ 07 mm = 125 N/mm² ≤ 08 mm = 100 N/mm² | nominal stress: ≤ 07 mm = 110 N/mm² ≤ 08 mm = 90 N/mm² | nominal stress: ≤ 07 mm = 100 N/mm² ≤ 08 mm = 80 N/mm² | nominal stress: ≤ 07 mm = 90 N/mm² ≤ 08 mm = 70 N/mm² | ||||||
| SAFETY FACTOR: 4 | SAFETY FACTOR: 5 | SAFETY FACTOR: 5.7 | SAFETY FACTOR: 6.4 | SAFETY FACTOR: 7.1 | ||||||
| 4 x 12 | S | 400 | 320 | 280 | 250 | 230 | 10 | 16 | 0.35 | 54079 |
| 5 x 15 | S | 630 | 500 | 440 | 400 | 360 | 16 | 25 | 0.54 | 54100 |
| 6 x 18 | S | 900 | 720 | 630 | 570 | 210 | 22 | 36 | 0.78 | 54333 |
| 6.3 x 19.1 | S | 1,010 | 790 | 700 | 635 | 570 | 25 | 40 | 0.86 | 53998 |
| 7 x 21 | S | 1,250 | 1,000 | 860 | 780 | 700 | 32 | 50 | 1.10 | 54130 |
| 8 x 24 | P | 1,250 | 1,000 | 920 | 820 | 710 | 32 | 50 | 1.40 | 58778 |
| 9 x 27 | P | 1,600 | 1,250 | 1160 | 1000 | 900 | 40 | 63 | 1.80 | 58779 |
| 10 x 28 | P | 2,000 | 1,600 | 1,440 | 1,250 | 1,120 | 50 | 80 | 2.20 | 58780 |
| 10 x 30 | P | 2,000 | 1,600 | 1,440 | 1,250 | 1,120 | 50 | 80 | 2.30 | 52303 |
| 11.3 x 31 | P | 2,500 | 2,000 | 1,800 | 1,600 | 1,400 | 63 | 100 | 2.85 | 7984841 |
| 13 x 36 | P | 3,350 | 2,650 | 2,430 | 2,100 | 1,890 | 85 | 132 | 3.80 | 58784 |
| 16 x 45 | P | 5,000 | 4,000 | 3,680 | 3,270 | 2,860 | 125 | 200 | 5.70 | 7988746 |
| GRADE RPA and RSA | ||||
|---|---|---|---|---|
| DRIVE UNIT GROUP ISO 4301-1 (FEM 9.511) | nominal stress [N/mm²] | Limit stress [N/mm²] | ||
| RPA | RSA | RPA | RSA | |
| M1 (1Dm) | 125 | 160 | 187.5 | 240 |
| M2 (1Cm) | 100 | 125 | 138 | 175 |
| M3 (1Bm) | 100 | 125 | 125 | 160 |
| M4 (1Am) | 90 | 112 | 112 | 140 |
| M5 (2m) | 80 | 100 | 100 | 125 |
| M6 (3m) | 70 | 90 | 90 | 112 |
| M7 (4m) | 60 | 80 | 80 | 100 |
| M8 (5m) | 55 | 70 | 70 | 90 |
| QUALITY AND DESIGNATION | GRADE P RPA | GRADE S RSA | ||
|---|---|---|---|---|
| Material | AISI 316 | AISI 316 | ||
| Stress at manufacturing proof force | σFPmin | N/mm ² | 315 | 400 |
| Stress at breaking force | σBmin | N/mm ² | 500 | 630 |
| Elongation at break | ABmin | N/mm ² | 15 | 15 |
| Surface hardness in the joint | d≤6.5 ⌀ d ≥7 ⌀ | HV 5 HV10 | ca. 250 | ca. 250 |